FX Lumber Guard retardant for Interior Wood - 55 gallon

Usually Ships in 1 to 2 Business Days
Frequently bought together:


FX Lumber Guard FIRE RETARDANT COATING is formulated for interior fireproofing wood, Lumber, Plywood, Reclaimed Wood, OSB, MDF, Trusses, Truss Joists, I-Joists, Trim, Moldings, Doors, Cabinets, Wood Framing, Furniture and many others. It is effective on pine, oak, fir, birch, red oak, maple, cherry, poplar, walnut, ash, hickory, cedar, red wood, mahogany and much more. 'Class A Retardant' according to ASTM E84 Extended 30 Minute Test. Comes with documentation for fire marshal.

Interior / Exterior Fire Retardant for I-Joist, SYP, Rim Board, PSL, LVL, Glulams, Wood, Lumber & Plywood: Yellow Pine, Oak, Cedar, Redwood, SPF, OSB, Fir, MDF, Particle Board and other porous species of softwoods / hardwoods & Sheathings. Exterior use for low moisture areas.
Testing & Standards: Accredited Third Party Testing Laboratories.
ASTM E84 - 30 minute tested • ASTM E2768 - 30 minute tested Class A / Type 1
• ASTM E119 - 1 hour rated • ASTM E119 I-Joist IRC 501.3 17 minute rated • ANSI/UL723 & UBC 42.1 • CAN/UL S102 Class A

For shipping drums, please call our office to arrange best shipping options - 405-702-0055.

Material to be treated must be clean & dry before treating. Agitate product before and during application. Apply FX Lumber Guard as it’s received. FX Lumber Guard maybe sprayed on with a low pressure hand pump sprayer, rolled on with paint roller or brushed on with a paint brush at a rate of 300-350 sf per gallon depending on material being treated. (Vertical spraying) Start from the bottom and work up as there is less run off this way. Multiple coats may be necessary. If so, wait for the first coat to dry completely (12-32 hrs depending on weather) before applying other coats. Rinse equipment & wash hands with soap and water. If you have any questions contact manufacturer.

View AllClose