Interior Wood

BanFire Intumescent Fire Retardant Paint is an effective and affordable intumescent fire retardant paint. Class 'A' Rated according to ASTM E84 Standard for Construction Materials. Theatrical stages, boiler rooms, elevator shafts, electrical support...

POLAPRIME 2 is an aquaborne, single component PVC/acrylic primer that is highly effective over asphaltic and cementitious surfaces. It penetrates deeply and coalesces to promote superior adhesion of the coatings to be applied. POLAPRIME 2 is a...

Contego PFB is a full-bodied latex, single component coating designed to protect a wide range of building materials including structural steel, aluminum, dimensional lumber, manufactured wood products, trusses, drywall, spray polyurethane foam...

FP100 is a high intumescent fire retardant coating. It can be used on any type of wood, porous or non-porous. Interior and exterior. Class A rated for ASTM E84, 30 minute extended test. ASTM E84 - Class A ASTM E2768 - 30 Minute Extended Test on...

Flamecheck M-111PA is a fire-retardant paint additive for latex (water based) Paint with a Class A fire rating. Flamecheck M-111PA is a water-based fire-retardant treatment that is non-toxic, non-corrosive, non-bioavailable, non-allergenic, non-odorous...

Firefree 88 ("FF88") is a water-based, non-toxic, thin-film intumescent fire retardant and resistant paint fully tested to provide fire ratings required by the International Building Code (IBC) for wall assemblies, floor/ceilings assemblies, roof ceiling...

FS3 Paint Additive is one of the most unique fire retardants available on the market today! Just one application of FS3 Paint Additive will provide a Class A fire rating. Just add one pint (as it comes in the container) per 1 gallon of paint, and add one...

BanFire meets the most common requirements looked for by US Fire Marshals, such as NFPA 701 and Life Code 101, as well as California Title 19 Section 1237.1 (CalFire Reg C-26701) for drapes, curtains and other hanging fabrics and decorations in public...